RSS Feed

Posts Tagged ‘gardening’

Cleaning Plant Pots

August 11, 2010 by stain remover expert No Comments »

cleaning plant pots

The basics of how to plant container gardens

All the information you need to know about how to grow a garden in containers. This Article will show you how to plant a successful and healthy garden in containers.

When you're ready to mix the ingredients, make the soil is moist and malleable. To determine this, take a handful, squeeze and drop it. If water comes out, it is too wet, if it bursts, it is too dry. But while the clod retains its shape or cracks a little when he fell, he is in good working condition.

Being Container Gardening some are clean when you start. Soak used or new clay pots overnight train to avoid attracting the moisture of the soil after planting. This is a very important step when you start your life of plants. If the pot wicks moisture from the new plant will be private.

Although redwood, cedar, cypress and s can be left natural, they can also be stained or painted. First clean surfaces, then apply one or two coats of stain or paint. Let dry completely before planting.

Consider the shape of each color and texture from the color of flowers and foliage and then and the final size of each plant. Do not choose material that is too small, and if you want a group of plants for a large, select a specimen height for the center to give height and scale.

Remember form of plants, especially evergreens stand out boldly in winter. rounded types, such as yews or arborvitae globe, look in angular. Hollies or yews, sheared into squares or pyramids, look better in circular tanks. The contrast of the curve with the straight always gives interest to the garden and guests visit.

The first step of potting container garden is to place sufficient drainage material in the bottom of each so that the water can pass freely, but not as much as to interfere with the roots. An inch or two of flower pot pieces (rounded side up), or chips of brick or slabs, cobbles, gravel, small stones, or ash can be used. The bigger, the pieces should be. Some gardeners spread a piece of burlap and a layer of coarse sand on the tracks of large volumes of drainage. A layer of vermiculite or sphagnum moss over the drainage material is also very well to keep the soil from clogging the holes. If the holes clog the roots will drown.

Above the drainage, spread a layer of soil, the amount depending the size of the rootball of the plant. Place the plant in a position such that the surface will be one inch (more large plants) under the lip of the pot. This space is needed to retain water.

fill dirt around the roots, firming gently with your fingers or a piece of wood to eliminate pockets air. Do not make the soil too tight for fine feeding roots must be able to enter with ease.

Finally water plants, let them drain. If the water passes quickly through the pot soil, press again for the company, which means that there are pockets of air. If the soil contains water too long, loosen a bit.

Place the plants in a sheltered area out of sun and wind for the first week or so while they make new root growth and adapt to new conditions.

When your Standing trees, shrubs or perennials grow too big for their pots, change their greatest. Spray them the day before so the soil will be wet for transplantation and not cause you to pull them out of trouble. Dry soil has a tendency to break, except on samples root bound.

Planting large specimens s size purchased is a temporary process more complex. If they are in baskets or boxes, they may be broken or torn, but be careful not disturb the roots. Boxes must be opened knife in tin. To remove the plants, put the cup pass on the side and lift consistently ball of soil gently so as not to break it. The less root damage better the chances that the plant will be healthy.

All benefits plants with mulch to spread evenly over the soil surface. This helps keep the soil cool and wet while keeping the weeds under control. Use peat moss, sand, gravel, stones, pebbles, buckwheat hulls, or vermiculite. One of these will also give an attractive appearance, but since the mulch contains soil, it is more difficult to determine when to water. Test by pricking the finger through the material to touch the ground.

In the case of planters, Again, use some of the drainage is good. Usually there are some holes on the bottom or sides. For best results, all four square feet should have a drainage outlet of two inches to keep the roots healthy.

Planters need care every day to keep plants at their best. This means that the size, staking, spraying, feeding, watering and more particularly. Often, growers are located in roof overhang or eaves wide. Wherever they are, do not depend on rainfall, but the pipe apply as often as necessary, which is usually every day and sometimes more often.

Indoor Plants : How to Clean Flower Plant Pots

 

Cleaning Supply Network

July 23, 2010 by stain remover expert No Comments »

cleaning supply network
Computer strnage made a few things?

I am trying to fix a Dell Dimension 4600c for someone and I find it has more than one issue.I ide and boot it errors on the mouse and keyboard. I then press f1 to boot into winxp. Then I noticed that the video screen flickers horrible.The is pink and yellow (virus?). So then I loaded the private security ZoneAlarm and cleaned as much as I could, but only now i cannot connect to internet reviews to update the defintions.i tried, but as I turned off the PC. o_0 He got angry and stopped. I should be able to just plug in my DSL jack and it should just recognize my network as my laptop does nephews, but it wont. Also, another strange thing is a bit of noise it makes while it starts .. almost like something short-circuit out.sounds as the power supply.it makes a strange noise in the loop, but it almost seems like it might be something with the video would say card.i hardrive but no noise.this click is a new sound ..

Random errors BIOS, video and sounds strange erratic: it looks like the failure if the motherboard you can answer a question – repeat this behavior every time you turn on the PC? If these are errors that have disappeared and new symptoms each time, Your friend does not error messages seriously as they should and may need to talk to others more often if this happens regularly. I'll give you advice, but I'm afraid the first possibility, and if nothing is resolved, if I were you I would stop trying repair the system and get professional help. (PC repair shop, Best Buy, Circuit City, the manufacturer of your if it is under warranty, the district PC geek, etc.) Keyboard / Mouse: try different connections: if PS2 (round plug), try unplugging the mouse and see if the error returns. If it's USB, see if you can use a USB/PS2 converter plug (included with most hardware stores, or available at electronics stores and office supplies) to force the keyboard / mouse into a PS2 instead. See if the error returns. Network: First, disable ZoneAlarm. You will be able to do in the program, or use the Control Panel, see Add / Remove Programs and uninstall the time. (You can retrieve it later.) Open My Computer, then click Network Connections (this may be on your desktop, if you do not find it in the Control Panel) and look at the NIC on the screen: is it activated? Is it working? If not activated, right click above and choose "Enable". If she already has, look at the state and see if the card is connected, not connected, limited or no connectivity, or unavailable. Ask another question on Yahoo Answers with this info (or you can email me by clicking on my name) and we can help others: hardware problems others seem more important to fix first. Noise: where. Listen to the case. Remove the lid if you have to listen. Where is the noise coming from? More specifically, whether it is the power (the large box where the power cord runs into the computer, including the fan), fan accessory (next to the CPU or on top of it, or a fan plugged into the front or rear panel away from the food), a hard drive, the motherboard itself, the processor itself (without the fan on top) or a Optical disks /. This will help greatly, and may indicate that some may need replacing. (If it is the motherboard, processor or Food that noise, there is a serious problem and your friend may need to get a new PC. If it is still under warranty, contact Dell. Otherwise you should get a new one.) Video: same idea as the keyboard / video – there two VGA taken back? One of them could be video board and the other an AGP card. Try this if the two video cards are present:! – WARNING: This can leave the computer unusable. If you are not comfortable with the CMOS setup program, or are not convinced of this fact, go into the video section. – I would recommend a computer geek to do this. Again, if you're not sure what to do, there is no shame in staying safe: find help. Read all these instructions before you begin, print them if you want to try. – Keep the cork in IT'S ORIGINAL LOCATION. – Enter CMOS setup: when the PC starts, watch the screen immediately when you press carefully Power. Look for a line that tells you which key to press to enter Setup. before it hit the screen disappears (usually when the disks are controlled and light all at once.) If you miss it, stop immediately in Windows PC and try again. – Look for a line there that says "Enable on-board video" or something like that and make sure. May say "video card" and give you the choice between "AGP", "PCI" or "board" (one of them can not appear.) Choose board or PCI and save your changes. Turn the PC off. – Change which connect the video cable is attached. Press Power. If you do not see the video, then back to the original form and see if she returns. If it does not, you need to reset the BIOS: open the lid, Search for a round battery and remove it if possible. (If stuck, do not do this: there is a jumper somewhere that needs to reset triggered the BIOS memory.) Wait 60 minutes and replace: This will restore the default settings and must restore the PC video. (Make sure the plug VGA is the port of origin.) If you do not have video after you reset the BIOS, you should seek professional help. ========================= ===================== Try some of these ideas here and in other responses, and add details to the question here so that we can help others.

Window Cleaning Network Plug.MOV

 

House Cleaning Plants

May 16, 2010 by stain remover expert No Comments »

house cleaning plants
How to make the use of cleaning products from natural herbs / plants?

My mother works in the law to the House-keeping companies and has a client who asks him to clean his house with natural home products. I know that you can use baking soda, vinegar, lemon ect, but he asked for her to return to the stone age "and use natural plants and herbs. Any ideas …. HELP

This http://www.benefect.com/canada/technology/botanical.htm product was developed by a gardener / botanist, he does not really work, has been scientifically proven to be as effective as water bleach to kill bacteria and viruses, and is made entirely from the common plant oils. I use in my practice (I work in the health), and have great confidence in her. If your stepmother does not want to buy the product, or it is not available in the United States, at least you can see that the ingredients are, and you can concoct your own cleaning and disinfecting solution. And I do not know what his problem with the vinegar would be, but is a great cleanser and disinfectant.

Housecleaning Tips : How to Clean Artificial Plants